- All parts for installing overflow and drain in 20 quart freezer
EQUIP. NEEDED TO DRILL & INSTALL DRAIN KIT ON POLY BUCKET. OR
WOOD BUCKETS.
7/8" REG. METAL DRILL BIT, FOR TOP OVER FLOW HOLE
3/4" PIPE TAP TO CUT THREAD IN HOLE TO PUT 3/4" ADAPTER IN.
1-3/8" HOLE SAW TO CUT BOTTOM HOLE .
Note: Please look at the more info tab
team Powered Ice Cream Maker - Buckeye Steam & Gas Reunion 2018
The top fitting screws into the wood overflow.
You will need to run a NPT 3/4 inch die through the hole.
(Note: My personal opinion is -- I do not recommend the drain kit for two reasons.
1. If you leave ice in the bucket you can damage the bottom of the can pushing down on the ice.
2. You may miss the center resting point for the can to turn on and damage the can on the top or the bottom.)